What is it?

Steel cladding is a way of restoring the life to your older buildings or can be used on a new building for a long lasting finish. You don't always need to build a new building. The steel cladding can restore roofs or walls to their original state, or better. Demco is a sales representative for Metal Sales Manufacturing Corporation and Vic West Steel, providing you with quality products from proven companies.

Why Steel Cladding?

If the shingles on your house or building are worn and need replacing, choose a steel roof. Need a strong cladding on your new building, choose steel cladding. The high grade steel has a very high tensile straight which causes it to last for years and years. Most steel has a tensile strength of 30, 000 psi and but our steel has a tensile strength of 82,000 psi. The styles can mimic any type of shingles or roofing type you wish to add, with the added benefit of it's long lasting nature.

Uses

Steel cladding can be applied to almost any building, shops, Quonsets, garages and even homes. Just about anything can benefit from the new hope our restoration process gives, or the extra years that steel affords.

Steel Cladding Choices

Demco Construction provides different steel solutions, all the choices are listed below categorized by either company.

Classic Rib

Is constructed from structural quality steel. This style of cladding is best for agricultural and residential home cladding. It is available in either an galvalum finish or any color finishes. It is available in 29 gauge steel. The panel receives three coats. First being a hot-dipped galvanized coating then coated with a primer and finally with a siliconized polyester top coat to give the soft
plastic look and feel.

Stile

Is metal panel that is designed to simulate clay shingles. This provides the elegant look with the advantages of steel cladding. It is available in a 26 gauge steel. Is is best suited for residential building that wish to have a long lasting yet stylish roof. This steel is much less expensive than the standard clay shingles, and looks so
good an expert could tell the difference.

Span Line

This is a deeper ridge panel than the classic rib. It gives the benefit of being able to go on a lower than normal sloped roofs. It has a higher rib to give the steel panel a stronger finish to accommodate the lower slopes which needs higher tensile strength. It is available in 26 gauge steel. Is is best suited for commercial building with lower sloped roofs. The panel receives three coats. First being a hot-dipped galvanized coating then coated with a primer and finally with a siliconized polyester top coat to give the soft plastic look and feel.

Seal Tight

This style of cladding is best for agricultural and residential home cladding. It is available in many color finishes listed below. Seal Tight is a 36" net coverage steel roofing and sidewall panel with five 3/4" high major ribs at 9" on center. Intermediate stiffening ribs add extra strength to this panel

Weather Tight

Weather Tight is a 36" net coverage steel roofing and sidewall panel with four 0.70" high major ribs at 9" on center. This style of cladding is best for rounded agricultural buildings like quansists, because it is only .070" thick. This allows it to be bent around the rounded structure. Even though it is thinner is still provides the maximum of protection.

NOTE: ALL COLORS SHOULD BE SAMPLED IN PERSON, COLORS MAY SLIGHTLY DIFFER